Load green vehicle

Automatic cable reels supplied inside the WALL BOX

Easier and more convenient

Why unroll and wind by hand, each time, the cable of his electric car?

With these spring-loaded cable reels, the cable automatically rolls and unrolls.

 

Cleaner and safer

The cable no longer drags on the ground:

It does not dirty, does not become worn and do not deteriorate.

It is not likely to cause falls.

 

2 types of connectors

 

Type 1 - SAE J1772-2009

The connector type 1 is equipped with 5 contacts:

- 3 of power: L1, N and PE

- 2 of communication : PP (closeness) and CP (pilot control).

It corresponds to the North American and Japanese standards.

It is very common on vehicles, but is not usually installed on charging stations.

This connector can only be used for single-phase recharge.

Max 32A 230V.

 

Type 2 - VDE-AR-E 2623-2-2

The connector type 2 is equipped with 7 contacts:

- 5 of power: L1, L2, L3, N and PE

- 2 of communication : PP (closeness) and CP (pilot control).

It corresponds to the European standard for AC charging stations. It is the most commonly used connector within the European manufacturers of electric cars.

This connector can be used for single-phase and three-phase recharges.

Max 32A 230V / 32A 400V.

 

More comfortable, cleaner, safer

- It allows you to create in your garage your own charging station

- To charge your electric car, do the same thing as at the gas station:

          1 - Pull the cable, it unrolls

          2 - Plug in, the car recharges

          3 - Unplug, the cable reels itself

          4 - Hit the road

- The cable no longer drags on the ground, it does not get dirty and does not risk to be damaged

- In accordance with the Mode 3 of the international norm IEC 61851-1

 

Version with WI-FI

For even more comfort, manage the load without leaving your sofa thanks to the WI-FI version

 

Code

Total length

Cable type

Charging

Plug in output

WI-FI

ERVWB-P6-1

4 m

3G2,5² + 1x0,5²

Single-phase 16A

Type 1 SAE J1772-2009

-

ERVWB-P6-1-WF

Yes 

ERVWB-P6-2

Type 2 VDE-AR-E2623-2-2

-

ERVWB-P6-2-WF

 Yes

Automatic cable reels to install after the WALL BOX

Easy, safe and clean solution to load your vehicle

Easier and more convenient

Why unroll and wind by hand, each time, the cable of his electric car?

With these spring-loaded cable reels, the cable automatically rolls and unrolls.

 

Cleaner and safer

The cable no longer drags on the ground:

It does not dirty, does not become worn and do not deteriorate.

It is not likely to cause falls.

 

2 types of connectors

 

Type 1 - SAE J1772-2009

The connector type 1 is equipped with 5 contacts:

- 3 of power: L1, N and PE

- 2 of communication : PP (closeness) and CP (pilot control).

It corresponds to the North American and Japanese standards.

It is very common on vehicles, but is not usually installed on charging stations.

This connector can only be used for single-phase recharge.

Max 32A 230V.

 

Type 2 - VDE-AR-E 2623-2-2

The connector type 2 is equipped with 7 contacts:

- 5 of power: L1, L2, L3, N and PE

- 2 of communication : PP (closeness) and CP (pilot control).

It corresponds to the European standard for AC charging stations. It is the most commonly used connector within the European manufacturers of electric cars.

This connector can be used for single-phase and three-phase recharges.

Max 32A 230V / 32A 400V.

 

VPLT 600 range

- White plastic carter shockproof, green cover

- Swivelling bracket

- Level of protection IP42

- Horizontal and vertical use

- Detent ratchet every 50 cm, easily removable if you want the cable to be in permanent traction

- Double grounding contact

- Collector isolation voltage 2.5 kV

- Roller cable guide

- Brass ring collector and brushes

- Use temperature - 5°C/+50°C

- Height 280 mm, width (bracket included) 305 mm , depth 145 mm

- For vertical use, free option mandatory (code ERXP6A7V)

 

Number of conductors

Section (mm²)

Total length

Cable type

Model

Charging

Plug in input

Plug in output

Code

3G

2,5

4 m

3G2,5 +1x0,5

VP6M16-21

Single-phase 16A

Type 2 VDE-AR-E 2623-2-2

Type 1 SAE J1772-2009

ERV-P6-M16-21

3G

2,5

4 m

3G2,5 + 1x0,5

VP6M16-22

Single-phase 16A

Type 2 VDE-AR-E 2623-2-2

Type 2 VDE-AR-E 2623-2-2

ERV-P6-M16-22

 

VSTEEL 500 range

- Painted steel and polymer housing

- Level of protection IP65

- Optional fixing brackets

- Horizontal and vertical travel (depending on options)

- High quality steel spring loaded (long-lasting in time)

- Supplied without fixation bracket, cable guide or ratchet (see options) The options are delivered disassembled

- Use temperature - 5 °C/+50°C

- Maximum winding speed: 30 m/minute

- Collector isolation voltage 2.5 kV

 

Number of conductors

Section (mm²)

Total length

Cable type

Model

Charging

Plug in input

Plug in output

Code

3G

6

8 m

3G6 + 1x0,5

VS5M32-21

Single-phase 32A

Type 2 VDE-AR-E 2623-2-2

Type 1 SAE J1772-2009

ERV-S5-M32-21

3G

6

8 m

3G6 + 1x0,5

VS5M32-22

Single-phase 32A

Type 2 VDE-AR-E 2623-2-2

Type 2 VDE-AR-E 2623-2-2

ERV-S5-M32-22

5G

2,5

8 m

5G2,5 + 1x0,5

VS5T16-22

Single-phase 16A

Type 2 VDE-AR-E 2623-2-2

Type 2 VDE-AR-E 2623-2-2

ERV-S5-T16-22

5G

6

8 m

5G6 + 1x0,5

VS5T32-22

Single-phase 32A

Type 2 VDE-AR-E 2623-2-2

Type 2 VDE-AR-E 2623-2-2

ERV-S5-T32-22